Silver clay is a perfect match for enamelling!

I love adding a bit of colour to my jewellery, and adding enamel is a great way to do that. It’s hard wearing and long lasting, plus the colours are amazing and shiny!

Enamel is essentially very fine particles of coloured glass. It comes in a powder form and needs to be cleaned and ground to make sure we only use the smallest particles and get the clearest or cleanest result. The enamel is applied to a precious metal and heated using a kiln or a torch to make the enamel melt and fuse to the metal.

You can use it in its dry form to dust an area of metal to coat it with enamel. You can also add water to it, and ‘wet pack’ it into your design.

Enamels can react with the other metal alloys that are in sterling silver, so we generally use fine silver (999) silver, which doesn’t have these alloys in it. It’s a purer silver. That’s exactly what silver clay is 999 or 99.9% silver! That makes it a great medium to use with enamels.

There are lots of techniques in enamelling.

Basse-taille is a low relief texture on a precious metal where the enamel is used to fill the relief.

Champlevé – The surface of the metal is cut away to form a recess where the enamel is placed.

Cloisonné – This is thought to be the oldest enamel technique. It involves fusing very fine wires to a base coat of enamel, using either fine silver wires or 18ct or 24ct gold wires to create a pattern which is then filled with enamel.

Plique-à-jour – This creates a stained glass window effect with transparent enamel, filling pre made holes in the silver.

My favourite is probably the Champleve where I do have some very light relief in the recesses. Rather than cutting away the metal to form a recess, I layer the silver to form a recess. In this way I also like to create scenes within the enamel or pops of colour.

We have a new enamel workshop on 5th March 2026. Why not come and have a go yourself!